The boards are predominantly free from rot & splits (the full length of the board), and not warped (but will warp if not correctly dried out). We therefore recommend that all unsanded boards are dried out for at least 2 weeks, on wooden sticks in a heated room with good airflow, otherwise you are at risk of warping or cracking if using indoors for furniture making. They typically contain approx 20-30% moisture during winter, and 10-20% during summer. Unsanded boards are stored externally under a roof, but not enclosed or indoors. Perfect for furniture, gardens, DIY Projects! So remember the standard scaffold board size is a width of 225 mm, a length of 3.9 m and a thickness of 38 mm.Reclaimed scaffold boards, 3-13ft lengths. They should also be keen on the support span as it determines at what length the scaffolding planks should be supported to avoid any unfavourable incidences. Your scaffolder should be able to choose the right dimensions for the scaffolding boards. They’re also quite durable compared to the timber scaffolding boards.īest suited for harsh environments, steel boards are tested in accordance with the BS EN 12811-1 compliance. Plastic boards are tested in compliance with the BSEN 12811-1:2003 standards. These boards are categorised into Class 1 or Class 2 depending on the amount of smoke produced when burning and how the flames spread.īoth are inflammable but class 2 has been tested and found to produce less smoke and no droplets or particles when burning. The fire retardant scaffolding boards are tested in compliance with the BS 476 Part 6&7(British Standards). Support/target span(usually written in metres).VG or MG indication(to show whether it was visually or machine graded).The band can also be branded to include the following: boards, the scaffolding board dimensions are the same.Īlthough timber boards are available as banded or unbanded, you’ll find that most have a metal band for protection against any impact damage. Although the support span is different for the B.S.I. standard boards can have a support span of either 1.2m for the visually graded and 1.5m for the machine graded. The Grade A standard boards offer a support span of 1.2m, while the B.S.I. The two can be visually or machine graded, which is marked on the board as ‘VG’ or ‘MG’. Grade A boards are tested to meet Grade A standards, whereas B.S.I Standard boards are tested to ensure they comply with the BS 2482:2009 (British Standard). Scaffold boards are tested to ensure that they comply with certain standards. Length Weight 1.5m 8.5kg 1.8m 10.2kg 2.4m 13.6kg 3.0m 17.0kg 3.9m 22.1kg Scaffold board dimensions for steel scaffolding boards Scaffold board compliance The table below gives an illustration of the weight you should expect with each length. The weight of steel scaffold boards is different from the others irrespective of their similar lengths. Length Weight 1.5m 7.7kg 1.8m 9.2kg 2.4m 12.3kg 3.0m 15.4kg 3.9m 20.0kg Scaffold board dimensions for Grade A, fire retardant, and B.S.I. Standard boards, and Fire retardant boards. The table below gives a clear illustration of how the weight varies with different scaffold board lengths for Grade A, B.S.I. This weight will vary depending on several factors like the length and how the boards have been stored especially timber scaffold boards. The scaffold board weight can range from 7.7 to 20.0 kg.
The thickness of a scaffold board is a standard dimension of 38mm regardless of the scaffold material used. What is the thickness of a scaffold board This measurement is regardless of the material or nature of the project. How wide is a scaffold boardĪll scaffold boards have a standard width dimension of 225mm. Depending on the type of material you’ve chosen, the length will equally impact the weight, considering the width and thickness are similar for most. They can be purchased in different lengths considering all projects aren’t of a similar nature. Scaffold boards are available in varying lengths ranging from 1.5m to 3.9m.
We’ll check out the dimensions for various scaffold board types. The best quality boards are either visually graded or machine graded. You can opt for scaffold boards that meet the Grade A standards, or the BSI standards(BS 2482). The dimensions might vary depending on the project you have going on and the type of board you opt for. The standard scaffold board width is 225 mm, 3.9 m length, and 38 mm thickness.
0 kommentar(er)
